Although your Traditional Irish Mirror has a protective lacquer finish it is advisable not to allow the edges of the wood to get or remain wet over a period of time.

Make cleaning your Traditional Irish Mirror part of your regular routine and remember that long-term exposure to direct sunlight may possibly damage some mirrors. To remove excessive dust from your mirror a very soft vacuum accessory brush may be used to attract dust without scratching the finish. This method requires extreme care and will remove dust from intricate corners.

The best and safest cleaner for a mirror is a clean, damp cloth. It may also be useful to use a cotton bud where necessary. Use a standard brand of glass or mirror cleaner that does not contain ammonia, vinegar or harsh solvents. If using water try bottled water if your tap water is mineral rich.  

Never spray any cleaner directly onto a mirror. Instead apply the cleaner on a soft cloth and wipe the mirror again taking great care not to come in contact with the edges of the wood.  

Always use soft, grit-free cloths when cleaning Traditional Irish Mirrors to reduce chances of scratching the surface. Be sure to dry all joints and edges thoroughly and to be certain that no commercial cleaner comes in contact with the edges of the wood. Excess moisture along the mirror's edge can seep in and harm the reflective backing.

Minor scratches, small air bubbles, surface waviness and lightly pitted areas occur naturally during glass manufacture and are not considered quality defects.